When fitting a Swivel Bather or bathboard, there has to be sufficient support from the bath to securely fit the product. In some instances, where the bath has been set into the wall, or if the wall has been tiled, the lip on the bath may not be wide enough to provide the required support. The Myco Wall Bracket may be secured to the wall, in order to provide the required amount of support.
The wall bracket is 560mm long, with an array of screw holes to allow a good fixing to the wall with appropriate fittings (screws & wall plugs not supplied) and the lip is 45mm wide.
Model Options
Myco Wall Bracket: | MWB |
